 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
PCMCIA Slots (TP 240 - 2609)
PCMCIA Slots
-Warning- Special care must be taken when disconnecting the
PCMCIA card not to cause a short or damage the connector.
To remove the PCMCIA slots:
- Remove the screw securing the PCMCIA slot board.
- Use a flat-bladed screwdriver to disconnect the PCMCIA card from the connector.
- Carefully remove the PCMCIA card.
Step |
Size (Quantity) |
Head & Color |
Torque |
1 |
M2.0 x 7 (1) |
Flat head, silver |
2.0 kgf-cm |
Note: Make sure you use the correct screw for replacement.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.