 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
1190 CPU Card (765D-9546 765L-9547)
1190 CPU Card
Step |
Size (quantity) |
Memo (torque) |
2 |
M2.5x5 mm (2) |
Flathead (3.5kgcm) |
NOTE: Do not reuse (see Screw Kit - FRU P/N) a screw you removed. Use a new screw and
tighten the screw to the torque specification shown.
- Connect the CPU card using the exact procedure shown in the figures, and make
sure that the two CPU card connectors are connected properly. If these
connectors are not connected, you cannot power on the computer.
- Do not touch the shaded area of the CPU card when connecting.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.