==View or Print jumper settings using Fixedsys or New Courier fonts== SiS 486G 3.3/5V Ver:E Motherboard - the optional 22 page manual is available as a 1.4meg archive. In securing this manual certain expenses were paid and in an effort to recover these fees its only available by donation. - AWARD BIOS ID string 7/28/94-SIS 85C471B/E-2C4I9F30-00 - 2-72 pin SIMM slots (1-128meg FPM DRAM) - 4-30 pin SIMM slots - 3-32bit VESA Local Bus slots - 7-16bit ISA slots - 64k-1024k CACHE support in 8-32pin sockets + 1 TAG RAM socket - AWARD Bios 1994-1995 - Green PC Connector - SiS 85C471 9433 QR 1994 chipset - Supports 3.3v/5volt CPU's - ZIF 237pin CPU socket 3 which supports these processors: INTEL 80486SX/SX2,80486DX/DX2/DX4,P24D,P24T CYRIX CX486S(M6),CX486DX/DX2(M7) SL80486SX/DX/DX2 - Supports speeds of 20/25/33/40/50/66/75/100(internal)MHz. - Manufactured by: VISION TECHNOLOGIES (now defuncted) : Full Yes Industries Taiwan (website down) ======================================================================= External Battery J1 TURBO switch enabled J6 2-3 (default) TURBO switch disabled J6 1-2 TURBO used for break switch J6 4-5 CMOS normal JP16 1-2 CMOS clear JP16 2-3 Monitor EGA/VGA/Monochrome JP17 open Monitor CGA JP17 closed CX486 CPU installed JP18 closed CX486 not installed JP18 open RC pin break switch enabled JP19 1-2 (default) RC pin used for RC JP19 2-3 CLKIN and CPUCLK same phase JP20 1-2 CLKIN delay for CPUCLK JP20 2-3 (default) 85C471 internal CLK=CPU OSC JP23 1-2 (default) 85C471 internal CLK=1/2CPU OSC JP23 2-3 Push button for break switch JP26 Break Switch For P24D only JP30 closed For P24D only JP31 closed CLK down by STPCLK control JP32 1-2 (486DX or SX) CLK down by SMOUT 3 control JP32 2-3 (486DX SL/enhanced) VCC=3.3v for DX4 CPU JP41 1-2,4-5 VCC=5volt JP41 2-3,5-6 For DX4 CPU JP42 open CLKIN and VLCLK same phase JP43 1-2 CLKIN delay for VLCLK JP43 2-3 (default) ======================================================================= DRAM configurations indicate support for: 30pin simms 72pin simms ----------------------------------- 256k x 9 256k x 36 1M x 9 1M x 36 4M x 9 4M x 36 8M x 9 8M x 36 16M x 9 16M x 36 * note: 8meg 30pin simms only work with all 4 slots of BANK 0 filled and one 8meg 72pin simm installed in BANK 1 (DRAM Config #2). Config Bank 0 Bank 1 Bank 2 -------------------------------------------------------------- 1 (30pin) (30pins) no other slots 2 SIMM5,6,7,8 SIMM10 SIMM9 3 SIMM9 SIMM10 SIMM5,6,7,8 DRAM SLOT Select Config JP36 JP37 ----------------------------------------------------- 30pin / 30pin 1 1-2 open 30pin / 72pin / 72pin 2 1-2 2-3 72pin / 72pin / 30pin 3 2-3 1-2 ======================================================================= Cache Bank 0 Bank 1 TAG --------------------------------------------------------- 64K 4 - 8kx8 4 - 8kx8 1 - 4kx8 128K 4 - 32kx8 none 1 - 8kx8 256K 4 - 32kx8 4 - 32kx8 1 - 16kx8 512K 4 - 128kx8 none 1 - 32kx8 1024K 4 - 128kx8 4 - 128kx8 1 - 128kx8 Cache JP1 JP2 JP3 JP4 JP33 JP34 JP35 ---------------------------------------------------------------------- 64K 2-3 1-2 2-3,4-5 1-2 1-2 1-2 open 128K 1-2 1-2 1-2,3-4 1-2 2-3 2-3 open 256K 2-3 2-3 2-3,4-5 1-2 2-3 2-3 open 512K 1-2 2-3 1-2,3-4 2-3 2-3 2-3 open 1024K 2-3 2-3 2-3,4-5 2-3 2-3 2-3 open ======================================================================= CPU Type JP30 JP31 ------------------------------- P24D closed closed All others open open ======================================================================= CPU Type JP8 JP10 JP11 JP12 -------------------------------------------------------- 80486SX 2-3 2-3 open open 80486DX 1-2,3-4 2-3 3-4 open 80486DX4 1-2,3-4 2-3 3-4 3-4 CX486SX(M6) 2-3 2-3 open 2-3,4-5 CX486DX(M7) 1-2,3-4 2-3 3-4 2-3 SLE486SX 2-3 2-3 open 3-4 SLE486DX 1-2,3-4 2-3 3-4 3-4 SLE486DX2 1-2,3-4 2-3 3-4 3-4 P24D 1-2,3-4 1-2 3-4 1-2,3-4 P24T 1-2,3-4 1-2 2-3 3-4 CPU Type JP13 JP14 JP15 JP21 JP22 ------------------------------------------------------------ 80486SX open open open 2-3 1-2 80486DX open open open 2-3 1-2 80486DX4 1-2 2-3 4-5 2-3 1-2 CX486SX open 1-2,3-4 2-3 1-2 2-3 CX486DX open 1-2,3-4 2-3 1-2 2-3 SLE486SX 1-2 2-3 4-5 2-3 1-2 SLE486DX 1-2 2-3 4-5 2-3 1-2 SLE486DX2 1-2 2-3 4-5 2-3 1-2 P24D 2-3 2-3 4-5 2-3 1-2 P24T open 2-3 1-2 1-2 1-2 CPU Type JP24 JP25 JP31 JP32 JP38 -------------------------------------------------------- 80486SX open open open 2-3 1-2 80486DX open open open 2-3 1-2 80486DX4 open open open 2-3 1-2 CX486SX 2-3 2-3 open 2-3 1-2 CX486DX 2-3 2-3 open 2-3 1-2 SLE486SX open open open 2-3 1-2 SLE486DX open open open 2-3 1-2 SLE486DX2 open open open 2-3 1-2 P24D open 1-2 1-2 2-3 1-2 (5volt) P24T 1-2 1-2 open 2-3 1-2 ======================================================================= CPU Speed for Clock Chips: U16-AVASEM, AV9107-03, KTS0147C Speed JP5 JP6 JP7 ------------------------------------- 20MHz closed open closed 25MHz closed closed open 33MHz open closed closed 40MHz closed open open 50iMHz closed closed open 50MHz open open closed 66iMHz open closed closed CPU Speed for Clock Chip: U17-MX8315 Speed JP5 JP6 JP7 ------------------------------------- 20MHz open open open 25MHz open closed open 33MHz closed closed closed 40MHz open closed closed 50iMHz open closed open 50MHz closed open open 66iMHz closed closed closed ======================================================================= CPU voltage JP41 ------------------------------- 3.3 volts 1-2,4-5 5.0 volts 2-3,5-6 (note: if the voltage regulators Q4, Q5 and/or Q6 ) ( are installed set JP41 to 1-2,4-5. ) Those are the various DX4 (3.3volt) voltage regulators. Q6 is usually the only one used but I suppose the others might be found on older boards. Q4 - part# IRF540 or IRF520 Q5 - part# 2N2222 or TO-92 Q6 - part# LT1085CT ======================================================================= VESA Wait States JP28 -------------------------------- 0 wait state 1-2 1 wait state 2-3 CPU Speed JP29 (BUS SPEED) ----------------------------------------- <= 33MHz 1-2 > 33MHz 2-3 ======================================================================= |