|
|
|
HPA LCD Panel Labeled 05K9309 or 05K9320
Identification label: HITACHI
NOTE: In step -4-, lift the LCD panel slightly to disconnect the flexible cable in step -5
| Step | Size (Quantity) | Torque |
|---|---|---|
| 1 | M2.5 x 6mm, nylon-coated (4) | 3-4 kgcm |
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
TFT LCD Panel
NOTE:
You can distinguish between HPA LCD, TFT LCD type 1, and
TFT LCD type 2 by the label on the LCD cable:
| Step | Size (Quantity) | Torque |
|---|---|---|
| 1 | M2.5 x 6mm, nylon-coated (4) | 3-4 kgcm |
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
Type 1 Labelled 05K9312 or 05K9322
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.