Symptom-to-FRU Index

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Symptom-to-FRU Index

Symptom-to-FRU Index

This section provides information about the following:

The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first.

NOTE: Perform the FRU replacement or actions in the sequence shown in the “FRU/Action“ columns. If a FRU did not solve the problem, put the original part back in the computer.

This index can also be used to help you decide which FRUs to have available when servicing a computer.

'Numeric error codes' show the errors detected in POST or system operation. In the following error codes, X can be any number.

If no codes are available, use narrative symptoms.

If the symptom is not listed, go to 'Undetermined Problems'

NOTE:

For IBM devices not supported by the diagnostic codes in this manual, see the manual for that device.
If the LCD is replaced with a new one, see 'Digitizer Adjustment' to adjust the pen-point pressure.

Back to

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.