United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
 

Maintenance and Service Guide
Compaq Presario 5000, 5100, and 5200 Series Computers

MSG index Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
DISASSEMBLY SEQUENCE
Electrostatic discharge
Service considerations
Preparation for disassembly
Serial number
Hood
Fax-modem
System board bracket
Serial port assembly
Mass storage devices
System board
Power supply
Front bezel
Instant On button board
Creativity Action Center
Fan
REMOVAL & REPLACEMENT

System Board Bracket

 

e8.gif (11150 bytes) There are ten steps in this procedure.
1 Perform preparation procedures
2 Remove the hood
3 Remove the fax/modem and any other option cards.

CAUTION:  The fax/modem and any other option cards must be removed before the system board bracket, or damage may occur to the system board.
4 Remove one screw from the top of the chassis and one screw from the side of the system board bracket. For models 5070, 5184, and 5185 there is an extra screw at the top of the chassis.

NEXT STEP

 

 

 

 

 

1.800.AT.COMPAQ
 
privacy and legal statement