 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
2158-Aptiva - System Board Jumpers and Connectors
2158-Aptiva - System Board Jumpers and Connectors
The blackened pin of a jumper represents pin 1.
DIMM Configurations
A maximum of 256MB memory may be installed.
You can install 16MB, 64MB, or 128MB PC-100 SDRAM-DIMM (64-bit, non-ECC, 100MHz, 3.3volt, gold contact) in any socket and
any combination.
See > BIOS Setup Utility - Memory/Cache Option's
When checking voltages, the power supply fan must be running.
To power-on the power supply without using the on/off switch, use a screwdriver
or other tool to short the connector CN2 pin 10-20 (with the switch cable
disconnected from the connector on the system board), or use a connection (jumper) to
short the black and green wires of the 20-pin connector (pin 14-15) on power supply.
See Part-Two (fullscreen)