Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Diagnostic Error Codes (Type 8644)



Diagnostic Error Codes (Type 8644)

Error Code/Symptom    FRU/Action
  
01A1h 1. Voltage regulator
(Failed 586 instruction test) 2. Processor
  3. Processor Card
  4. System Board
01A2h 1. Processor
(Failed 486 instruction test) 2. System Board
  
01A3h 1. Processor
(Failed 386 instruction test) 2. System Board
  
01A4h 1. Processor
(Failed 386 Register test) 2. System Board
  
01A5h 1. Processor
(Failed 386 ALU/Multiply test) 2. System Board
  
01A6h 1. Processor
(Failed 32bit Address test) 2. System Board
  
01A7h 1. Processor
(Unknown error reported 2. System Board
from Application Processor)
01A8h 1. Processor
(Invalid processors(s) 2. System Board
found/none found to test)
01A9h 1. Processor
(Application Processor 2. System Board
Test error)
01AAh 1. Processor
(No Application Processor found) 2. System Board
  
0104h 0105h 0106h 0109h 1. System Board
(System Board Test failed)


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.