Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Systems Checkout (WP z50 - 2608)



Power Systems Checkout


To determine whether a power systems problem is due to the AC Adapter or the battery pack, do the following:
  1.  Remove the battery pack.
  2.  Connect the AC Adapter and lock the battery release lock.
     Check that power is supplied.
  3.  Disconnect the AC Adapter and install the charged battery pack,  then check that power is supplied by the battery pack.


If you suspect the problem is due to the AC Adapter, go to 'AC Adapter Checkout'.

If you suspect the problem is due to the battery pack, go to 'Battery Pack Checkout'.

External Power/Charge Status LED - indicates the following status:

LED AC Adapter Battery Pack Charge Status
Amber Connected Li-ion (standard or high-capacity battery) Not full
Green Connected Li-ion (standard or high-capacity battery) Full
Green Connected Dry cell battery is connected or
no battery is connected		 -
Not lit Not connected - -

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.