Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

FRU Codes (TP 380XD, 385XD, 380Z - 2635)



FRU Codes

If an error is detected by the diagnostic tests, a four-digit  FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits  first, then replace the FRU indicated by the two rightmost digits . No FRU is assigned to code 00. If only one FRU is suspected, the other FRU code is filled with zeros. See the referenced page before replacing the FRU.

FRU Code FRU/Action
10 System Board
11 CPU Card
12 DC/DC card
20 Memory (See 'Memory Checkout'.)
30 Reserved
32 External Keyboard
33 External Mouse
34 AC Adapter
35 (Stereo) Speaker
36 Battery in the battery bay
38 Fan
40 LCD unit
45 External monitor
50 1. Reseat the diskette drive (FDD-1)
2. Diskette drive (FDD-1)
51 1. Reseat the diskette drive (FDD-2)
2. Diskette drive (FDD-2)
60 1. Reseat the hard disk drive (HDD)
2. Hard disk drive (HDD)
70 PC Card (at the port replicator)
72 1. Reseat the PC Card slot assembly
2. PC Card slot assembly
73 Port replicator
90 CD-ROM drive
92 DVD drive


NOTE: The device ID and error codes are used to indicate the detailed portion of the FRU that is causing the error.
If replacing a FRU does not correct the problem, see the device ID or error code from the previous failure. If they changed, the new FRU might be defective, or it may have been incorrectly installed.


If the problem remains after replacement of the FRUs, go to 'Undetermined Problems'.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.