 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
1045 Base Cover Assembly / Keyboard Latch
1045 Base Cover Assembly / Keyboard Latch
NOTE: Pushing the keyboard latch from the outside of the base cover
1, pull out the latch 2. Some pressure might be
needed to push the latch.
When replacing: Assemble the parts as shown below, then replace the latch.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.