|
|
|
| Symptom/Error | FRU / Action in Sequence |
|---|---|
| The system will not suspend or resume | 1. Go to Suspend Mode |
| by opening or closing the LCD. | ° For TP 2460-560 |
| ° For TP 2460-560x (60x, 70x) | |
| and check that the computer | |
| can enter suspend mode. | |
| 2. Boot an operating system and press Fn+F4. | |
| If the computer enters suspend mode, suspect | |
| that the application program is not working | |
| properly. | |
| 3. LCD Assembly | |
| 4. System Board | |
| Battery Fuel-Gauge does not go | 1. Go to Checking the Battery Pack and see the note. |
| higher than 90%. | ° For TP 2460-560 |
| ° For TP 2460-560x (60x, 70x) | |
| Memory count (size) appears | 1. Go to Memory Checkout |
| differently from actual size. | ° For TP 2640-560 |
| ° For TP 2640-560x (60x, 70x) | |
| System configuration does | 1. Go to 'Checking the Installed Devices List' |
| not match the installed devices. | |
| System hangs intermittently. | 1. Go to 'Intermittent Problems' |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.