![]() |
![]() ![]() |
Terminal | Voltage (V dc) / Signal |
---|---|
1 | + 0 to + 13.5 |
2 | Send |
3 | Thermal |
4 | Ground (-) |
5 | Select |
NOTE: Signal lines, not used in these steps, are used for communication between the system and the battery.
NOTE: If the voltage of the battery pack is 0 V, it is not defective. replace the battery.
If the resistance is not correct, replace the battery pack.
If the resistance is correct, replace the system board.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.