FRU Codes

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

FRU Codes

FRU Codes

If an error is detected by the diagnostic tests, a four-digit FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits first, then replace the FRU indicated by the two rightmost digits . No FRU is assigned to code 00. If only one FRU is suspected, the other FRU code is filled with zeros. See the referenced page before replacing the FRU.

FRU Code FRU/Action 10 System Board 20 Memory 'Memory Checkout' 30 Reserved 32 External Keyboard 33 External Mouse 40 LCD Assembly 45 External CRT 50 Reseat the Diskette Drive Diskette Drive 60 Reseat the Hard Disk Drive Hard Disk Drive 81 Internal Modem Card (if installed) 90 Reserved

FRU Code	FRU/Action
10	System Board
20	Memory 'Memory Checkout'
30	Reserved
32	External Keyboard
33	External Mouse
40	LCD Assembly
45	External CRT
50	Reseat the Diskette Drive Diskette Drive
60	Reseat the Hard Disk Drive Hard Disk Drive
81	Internal Modem Card (if installed)
90	Reserved

NOTE: The device ID and error codes are used to indicate the detail portion of the FRU which caused the error. If replacing a FRU does not correct a problem, see the Device ID or error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed.

If the problem remains after replacement of the FRUs, go to 'Undetermined Problems'

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.