Maintenance and Service Guide
Compaq 2200 and 2400 Series Computers

DISASSEMBLY SEQUENCE Preliminary considerations Hood Button board Front bezel Speakers Fax-modem NIC card Riser card Mass storage devices Power supply System board components

REMOVAL & REPLACEMENT Riser Card (Backplane)     There are six steps in this sequence. 1 Perform preparation procedures. 2 Remove the hood. 3 Remove the fax-modem. 4 Remove the NIC card, if present. 5 Remove the three screws holding the riser card to the cross-brace bar. NEXT STEP

Revised: 10 August 1998