 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Checking Operational Charging
Checking Operational Charging
To check operational charging, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining
when installed in the computer.
Perform operational charging. If the battery status indicator does not turn on, remove the battery pack and let it return
to room temperature.
Reinstall the battery pack. If the charge indicator still does not turn on, replace the battery pack.
If the charge indicator still does not turn on, replace either the system board or DC-DC card that the battery is connected to.
Then reinstall the battery pack.
If the reinstalled battery pack is not charged,
go to 'Checking the Battery Pack'.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.