|Symptom / Error||FRU / Action in Sequence|
|Unable to communicate||1. Make sure the setup for the IR is correct.|
|using the Infrared (IR) Port.||2. Make sure there are no fluorescent lights|
|near the computer.|
|The computer may receive optical interference|
|from the fluorescent light.|
|3. Reseat the IR unit.|
|4. Run the advanced diagnostic test. If an|
|error occurs and a FRU code is displayed,|
|replace the parts shown by the FRU Code for TP-2625.|
|or FRU Code for TP-2635.|
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.