IBM-AUSTRIA - PC-HW-Support 30 Aug 1999
FRU Codes (2635 380-385)
If an error is detected by the diagnostic tests, a
four-digit FRU code is displayed. The FRU code indicates two
suspected FRUs. Replace the FRU that is indicated by the two
leftmost digits first, then replace the FRU indicated by the
two rightmost digits . No FRU is assigned to code 00. If
only one FRU is suspected, the other FRU code is filled with zeros.
Replace the FRU that is indicated by the two leftmost digits first, then
replace the FRU that is indicated by the two rightmost digits.
See the referenced page before replacing the FRU. The suspected FRU name is
also displayed on the screen.
||1. Reseat the Diskette Drive (FDD-1)
2. Diskette Drive (FDD-1)
||1. Reseat the Diskette Drive (FDD-2)
2. Diskette Drive (FDD-2)
||1. Reseat the Hard Disk Drive (HDD)
2. Hard Disk Drive (HDD)
||PCMCIA Slot Assembly
If the problem remains after replacement of the FRUs,
go to 'Undetermined Problems'.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.