BIOS release 1.1 for VA-10  V1.0/V1.1


Release information:

[ENGLISH]

0. Please use flash utility AWDFLASH v8.24F to update VA-10 BIOS.
1. Revised the default value of "DRAM Voltage Control" to "2.6V".
2. BIOS Compile Date: 715/2003.


[中文]

0. 請使用更新程式AWDFLASH v8.24F 更新VA-10 BIOS。
1. 將 "DRAM Voltage Control" 項目預設值改為 "2.6V"。
2. BIOS 日期: 7/15/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "va1111.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================