Official BIOS release 8B for ST6E/ST6E-RAID V1.0

Release information:

[ENGLISH]

1. Raise the adjustable CPU Core Voltage from +0.125v to +0.2v for Celeron 
   and PentiumIII 0.13 micron process processors.
2. HPT 370 RAID BIOS version 2.0.1024. The RAID function is for ST6E-RAID 
   only. This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected. 
3. BIOS Compile date: 03/05/2002.

[TRADITIONAL CHINESE]

1. 針對 0.13 製程的 Celeron 及 PentiumIII 處理器增加 CPU 核心電壓之可調整
   範圍。
2. HPT 370 BIOS 版本: 2.0.1024。適用於 ST6E-RAID。本 BIOS 同時適用於非 
   RAID 之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 
   disable HPT BIOS。
3. BIOS日期: 03/05/2002。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "st6e8b.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power core and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.