BIOS release 1.6 for KV8-Pro V1.0/1.1

Release information:

[ENGLISH]

1. Support Sempron CPU.
2. Update uGuru Utility to uKV8_018.BIN.
3. Modify "LDT Bus Frequency" item from FSBx5, x4, x3, x2 to x1, and
   remove "Auto" selection.
4. Add FSB up to 400 MHz & enhance stability over 300 MHz.
5. Remove HyperTransport Voltage 1.4V.
6. Add "Fixed (74Mhz)" in AGP Ratio item.
7. Fix the issue that "LDT & PCI Bus Control" item "16bit" function fail.
8. BIOS compile date: 07/29/2004


[中文]

1. 支援 Sempron CPU.
2. 修改選項 "LDT Bus Frequency" 由 FSBx5, x4, x3, x2 至 x1, 並移除 "Auto"
   選項.
3. 新增 FSB 至 400 MHz 及超過 300 MHz 之穩定性.
4. 移除 HyperTransport Voltage 1.4V.
5. 新增 "Fixed (74Mhz)" 於 AGP Ratio 選項.
6. 修正 "LDT & PCI Bus Control" 選項之 "16bit" 功能失效.
7. BIOS日期: 07/29/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kv8p16.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================