How to update the BIOS (For Award BIOS)?

	Step 1: Make sure the downloaded BIOS is applicable to your motherboard.
        	(Please check the model and the version of your motherboard.)

	Step 2: Power on the system and enter the pure DOS Mode.
		
		Warning: If you try to update BIOS under Windows DOS box Mode, 
			 it will cause unexcpet damage for your system.

	Step 3: Build a new temporary subdirectory, then copy the file to this
		Subdirectory.
		
		For example: copy the "AWDFLASH.EXE" and "DGL200.EXE" to the
			     directory.

	Step 4: Go to the temporary subdirectory and run the downloaded file. 
		It is a	self-exactor file, All you have to do is execute this 
		file. Please remember the full filename of "*.BIN" file, which
		is one of these de-compressed files.

	Step 5: Run "AWDFLASH.EXE /CC /CD /CP".
	
		Notice: If your motherboard is based Intel 430VX or earilier,
			please use AWDFLASH.EXE v5.34. Don't use AWDFLASH.EXE v.7.05 
			or later.

 	Step 6: Type the filename of the new BIOS according to the instruction.
		(The filename is " *.BIN ")

	Step 7: Press "Y" when AWDFLASH.EXE asks whether or not you are going to
		save the old BIOS.

	Step 8: Type a filename for the old BIOS. Then Press "Enter."

	Step 9: Type "Y" when AWDFLASH.EXE asks if you are going to update the BIOS.
 		(NOTE: Don't power down the system or press <Alt+Ctrl+Del> before
 		you finish updating BIOS, or it will cause the system to hang 
 		permanently.)

	Step 10: Please reboot your computer after you finish updating the BIOS.

	Step 11: Press <Del> to enter BIOS setup to execute "LOAD SETUP DEFAULTS."

	Step 12: If your motherboard has built-in SCSI interface, press 
		 <Crtl> + <A> enter SCSI BIOS setup to execute "LOAD DEFAULTS."
		
		 Notice: If your model is P55TV, please use 7860cfg.exe to setup
		 	 SCSI options due to we remove SCSI BIOS setup program 
		 	 from system BIOS.