©2002 KURIAKI BIOS DATABASE

AX63 Pro

Last Updated: 11/12/01

ax63p128.zip R1.28 02/13/2001 198KB 
Checksum C92Dh 
Adds "PCI Master Read Caching" option in Chipset Feature Setup. 
 
ax63p127.zip R1.27 12/22/2000 198KB 
Checksum 0A68h 
Adds 1.70V adjustment option for Celeron FC-PGA370 CPU. 
Sets default frequency ratio at 133MHz to X3. 
Displays CPU front side bus frequency and clock ratio on POST screen. 
 
ax63p126.zip R1.26 12/19/2000 198KB 
Checksum ACD0h 
Fixed displaying 667MHz CPU as 666MHz. 
Fixed that if the user didn't create ZVHDD space, system can't enter OS_S4 in Win98 ME. 
Fixed malfunction of serial mouse after resuming from suspend; it may not be waken up by all serial mouse, for best result, Logitech products are recommended.  
 
ax63p125.zip R1.25 09/29/2000 198KB 
Checksum ADC4h 
Saves user-defined parameters to flash ROM. 
 
ax63p121.zip R1.21 08/03/2000 196KB 
Checksum 8F8Dh 
Supports Cyrix III CPU. 
Updates microcodes for Coppermine CPU. 
 
ax63p120.zip R1.20 07/04/2000 195KB 
Checksum 1DBCh 
Correction of CPU detection:
Reports 900MHz instead of 901MHz for Coppermine 900(100x9).
No longer displays 'B' or 'E' for Coppermine 128K (Celeron) CPU.
Reports 800 for Coppermine 800/100 instead of 800E. 
Adds suffix 'A' to Coppermine128K 533MHz CPU. 
 
ax63p119.zip R1.19 05/24/2000 195KB 
Checksum 6E8Bh 
Adds "Boot Up Floppy Seek" , "Typematic Rate Setting" , " Typematic Rate (Chars/sec)", "Typematic Delay(Msec)" to BIOS feature Setup. 
Fixed that APM OS (eg. Win 98, DOS...) cannot shutdown without a PS2 mouse plugged. 
 
ax63p117.zip R1.17 05/03/2000 195KB 
Checksum 2327h 
Supports Vcore adjustment for 1.50V Celeron FC-PGA 370 CPU. 
Fixes incorrect detection of SDRAM size in DIMM Slot 3 (eg. APACER 128MB, Single-side, Chips by WINBOND ) 
 
ax63p116.zip R1.16 04/17/2000 195KB 
Checksum 5D77h 
Fixes power button malfunction due to incompatibility with   TNT2 Ultra graphic cards. 
 
ax63p114.zip R1.14 03/15/2000 195KB 
Checksum EA7Eh 
Changes ACPI version from 1.00 to 1.00B to install Win98 SE and Win2000 in ACPI mode by default. 
Updates CPU microcodes. 
Supports ZIP 250 devices. 
Supports Wake_On_Mouse for 4 frame PS2 mouse. 
[Note] Please follow steps below to flash this new type BIOS of AX63 Pro motherboards.

Procedure:

Download this zipped file. 
Run shareware PKUNZIP (http://www.pkware.com/) which supports miscellaneous operation systems to extract the binary BIOS file and the flash utility. Or Winzip (http://www.winzip.com/) in Windows environment. 
Save "AX63P114.EXE" and "AX63P114.BIN" to a DOS floppy disk. Reboot your system with this disk without loading any memory handler (suh as EMM386) or device driver to get as much free space as possible. If you have an EPROM writer, simply take the .BIN file to program your BIOS. 
Execute A:>AX63P114 and the program will do the rest of it. 
DO NOT turn off power during flashing process, until you are asked to!! 
Reboot system and press "DEL" to enter BIOS setup, load "BIOS SETUP DEFAULT", then SAVE and EXIT. Done! 
 
ax63p112.exe 1.12 12/30/1999 275KB 
Supports 1.2M FDD. 
Supports Coppermine CPU; adds adjustable VCore function for 1.60V PPGA370 Coppermine CPU. 
Fixes problems in installing Windows 2000 from its bootable CDROM. 
Shorten initializing time of booting from some certain brands of CDROM drive.
Binary file ax63p112.bin, checksum 6239h 
 
ax63p111.exe R1.11 10/23/1999 276KB 
Make warnings beep when no DRAM installed. 
Add VCore-adjustable function for 1.65V Coppermine CPU. 
Support Ditto tape drive. 
Add letter 'B' to distinguish 133MHz FSB. 
Add letter 'E' to distinguish Coppermine CPU. 
Add microcodes updates for Coppermine CPU of both PPGA370 and slot 1. 
Fix failure in going to S4 by pressing sleep button
Binary file ax63p111.bin, checksum FE9Fh 
 
ax63p109.exe R1.09 09/29/99 275KB 
Fixed that AC PWR Auto Recovery malfunction. 
Supports 2.05V CPU (133Mhz) in Vcore adjustment.
Binary file ax63p109.bin, checksum AE02h 
 
ax63p108.exe R1.08 08/27/99 275KB 
Modify PCI routing table for 596 series following chip verdor's suggestion. 
Fixed system hang in Win98 SE (APM mode) when going through "Start->ShutDown->ShutDown" and USB keyboard enabled in BIOS setup and VIA routing table driver installed. 
Binary file ax63p108.bin, checksum 7E50h 
 
ax63p106.exe R1.06 08/16/99 275KB 
Better DRAM performance. 
No "Vcore Adjustable Set to" item available if CPU Vid other than 1.8V/2.0V/2.8V detected. 
If manufacturer defined CPU Vcore is not equal to user defined Vcore, a warning message will pop up. 
Vcore adjustable range change according to CPU type
CPU=1.8V, 1.8V/1.9V/1.95V available
CPU=2.0V, 2.0V/2.1V/2.2V available
CPU=2.8V, 2.8V/3.0V available 
In case of CMOS checksum failure (for example after clearing CMOS), load jumperless default value to CMOS.  
 
ax63p100.exe R1.00 07/06/99 275KB 
Initial release. 
Tested with 600MHz CPU with 133MHz FSB and x4.5 ratio selected seperately.