BIOS release 1.3 for  KD7A  V1.0


Release information:

[ENGLISH]

0. Please use flash utility AWDFLASH v8.24F to update KD7A BIOS.
1. Change wording "DDR SDRAM at bank" to "DDR at DIMM".
2. Change some error in DMI pool data.
3. Fix the issue that the system occasionally hangs at post code 26 if
   the system is using 133/166 FSB CPU and the power was turned off during
   boot up procedure when the post code is AE.
4. BIOS compile date: 08/28/2003.

[中文]

0. 請使用更新程式AWDFLASH v8.24F 更新 KD7A BIOS。
1. 修正 "DDR SDRAM at Bank :" 為 "DDR at DIMM"。
2. 修正DMI Pool Data。
3. 修正使用 133/166 外頻 CPU 開機時在 Post code 執行到 AE 時，關掉 Power
   後再開機偶而會當在 Post code 26的問題。
4. BIOS 日期: 8/28/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kdv13.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================