BIOS release 1.9 for IC7 / IC7-G V1.0 / 1.1


Release information:

[ENGLISH]

1. Update CPU micro code.
2. Add notification when none 80-wire cable is installed.
3. Fixed them problem that system hangs if
   1) DRAM ratio is set to 5:4 or 3:2
   2) DRAM timing by SPD
   3) N/B strap CPU as FSB800
4.BIOS compile date: 11/18/2003

[中文]

1. 更新 CPU micro code.
2. 增加當使用非80-wire 排線時之注意字串.
3. 修正當有下列情形時,系統當機狀況之發生:
   1) DRAM ratio 設定在 5:4 或 3:2 時
   2) DRAM timing 在 SPD 時
   3) 當N/B strap CPU 在 FSB800
4. BIOS日期: 11/18/2003.


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "ic719.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.