Official BIOS release AJ for BD7II/BD7II-RAID

Release information:

[ENGLISH]

1. Fix multimedia device lost issue with 533MHz FSB CPUs while load 
   Fail-Safe / Optimized Default in BIOS.
2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7402)
3. Load proper setting automatically for Willamette CPU when Load 
   Fail-safe/Optimized Default in BIOS.
4. HPT 37x BIOS version 2.31. The RAID function is for BD7II-RAID only. 
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected. 
5. BIOS compile date: 7/23/2002. 


[CHINESE]

1. 解決使用 533MHz 外頻 CPU，並在 BIOS 內 Load Fail-safe/Optimized Default
   ，造成multimedia device遺失的情形。
2. 增加 SVID 和 SSID 在 ICH4 USB 2.0 上 (SVID:147B,SSID:7402)。
3. 使用 Willamette CPU，在設定Load Fail-safe/Optimized Default後，載入適當
   的設定值。
4. HPT 37x BIOS version: 2.31。適用於 BD7II-RAID。本 BIOS 同時適用於非 RAID 
   之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable HPT 
   BIOS。 
5. BIOS 日期: 8/23/2002。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd72aj.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.