BIOS release 1.1 for BD7-E V1.0
                                    

Release information:

[ENGLISH]

1. Fixes the issue while S4 resumed, the MAC Address of onboard LAN 
   chip can not correctly display. 
2. Adds the following settings for "CPU Shutdown Temperature". 
   .80C/176F 
   .85C/185F 
   .90C/194F 
3. Changes the default setting of "CPU Warning Temperature". 
4. Fixes the problem that if "Land Boot Rom" setup to Enable, it would 
   hang while resumed from S4 mode.
5. Revises the item help of "Shut down When CPU Fan Fail".
6. BIOS Compile Date: 6/17/2003.


[中文]

1. 修正 S4 Resume 時 Lan MAC Address 無法正確顯示之問題。
2. 在 "CPU Shutdown Temperature" 增加以下項目：
   .80C/176F 
   .85C/185F 
   .90C/194F 
3. 修改 BIOS Setup 中 "CPU Warning Temperature" 的預設值。
4. 修正當 "Lan Boot ROM" 為 Enable 時，從 S4 Resume 會當機之問題。
5. 修改 "Shutdown When CPU Fan Fail" 項目的 Help。
6. BIOS 日期: 6/17/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd7e11.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================