Data bus:	16-bit ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
34-pin control cable connector - floppy drive	J1
40-pin IDE (AT) interface connector	J2
4-pin connector - drive active LED	J3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IRQ14 (Unqualified)	W1/pins 1 & 2	closed
	IRQ14 (Delayed until active)	W1/pins 3 & 4	closed
»	Floppy drive enabled	W3	closed
	Floppy drive disabled	W3	open