Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Type 68x6 - MCA / Cable for Video Adapter



(Aug-1995)
Subject: Mach5 MCA Cable For Video Adapter

PROBLEM DESCRIPTION:
All Microchannel VIDEO Adapters DISPLAY NO VIDEO, and do not INTERRUPT operation of PLANAR VIDEO.

MACHINES AFFECTED:

PRODUCT CODE NAME - MACH5
MACHINE NUMBER - 68X6
MODEL NUMBER - ALL MODELS
BUS ARCHITECTURE - MICROCHANNEL/PCI

OTHER MACHINES AFFECTED: NONE

ROOT CAUSE:
Customer did not have OPTION CABLE 06H6727 - AUXILIARY VIDEO EXTENSION CABLE for Microchannel. Cable runs from MCA RISER to VIDEO FEATURE CONNECTOR on SYSTEM BOARD and allows MCA VIDEO ADAPTER to override ON-BOARD VIDEO. Without cable, MCA video cards do not become active. This OPTION is not CLEARLY EXPLAINED in the INSTALLING OPTIONS GUIDE. In the INSTALLING ADAPTERS SECTION, it incorrectly states that the customer may need to change a jumper, and refers them to PAGE 103. There is NO JUMPER TO CHANGE, and the customer should refer TO PAGE 111 for a description of the cable required. Publications is now aware of the problem and is moving to correct the information. If a correct HW-configuration (cable installed) still does'nt work, then try a BIOS re-flash and SELECT ONLY the U.S or U.K. language group for flashing. (BIOS Lvl. <= 38a and XGA-2 MC-adapter!)

TEMPORARY WORK AROUND: NONE

PERMANENT FIX:

OBTAIN OPTION PART NUMBER 06H6727 (FRU 06H6728) AND INSTALL.

ISOLATION AIDS:
NO VIDEO FROM MCA VIDEO ADAPTER. SYSTEM VIDEO WORKS FINE. IF THERE IS NO CABLE CONNECTING VIDEO FEATURE CONNECTOR TO RISER, THIS APPLIES.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.