Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

System will not POST with a DIGI board PC/4



PROBLEM - System will not POST with a DIGI board PC/4 installed in a 6384 425sx (VP2). machines affected - All VP2 models 6382/S 6384/D or 6387/T.

SOLUTION - The DIGI board default base address is 100, 108, 110, and 118. The Valuepoint will not function at some base addresses less than 200. therefore, the DIGI board's base address should be set starting at 200. Switch DS2 should be set to 200, DS3 208, DS4 210 and DS5 at 218


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.