Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Madge Smart / NetWare / OS/2



PROBLEM - When using the Madge ringnode Token Ring adapter with netware requester for OS/2, one of the following problems may result:

1. the ODI device driver will fail to load,
2. the system will lock up, or
3. the adapter will fail to keep a connection to the network.

Machines AFFECTED - All Valuepoint systems.

SOLUTION - The Madge ringnode adapter must be set to both async and normal at bus timing mode. These modes are set using the switch blocks on the adapter. even though The switches are set correctly, the OS/2 ODI device driver overrides the async/sync switch and places the adapter in sync mode. OEM adapters operating in synchronous mode may have problems operating correctly in a Valuepoint system due to glitching on the ISA sys_clk signal.

Workaround - Ensure that the switch settings for the adapter are set for async and normal AT bus timing. In addition, Madge has a beta OS/2 ODI driver available that fixes sync vs. async problem. Contact Madge technical support and mention the problem to obtain a beta version of the OS/2 ODI driver.

Permanent fix - Madge plans on releasing the beta version of the OS/2 ODI driver it will be generally available off the Madge BBS.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.