 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
SCO UNIX will not boot in the display mode
PROBLEM - SCO UNIX will not boot in the display mode.
Machines AFFECTED - All 6382/S, 6384/D, and 6387/T running SCO UNIX.
SOLUTION - A FLASH update diskette (level 51 or higher) will solve this problem. The FLASH
update can be obtained from the IBM BBS.
Additional Information - N/A
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.