 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Removing the 3.5-Inch Hard Disk Drive from the Adapter Tray - (Aptiva 2172 - SL-A)
Removing the 3.5-Inch Hard Disk Drive from the Adapter Tray
- To remove the hard disk drive from the adapter tray, remove the four shoulder screws on the
underside of the tray.
- Four cushion rings are used to minimize the acoustic interference.
To remove the cushion rings, slide and lift.
-ATTENTION- When installing the hard disk drive, the cushion rings and
shoulder screws must be used to secure the hard disk to the tray.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.