|
Serial Port
The machine type 2170 comes with a 9-pin serial port. This parameter displays
the current address for serial port.
The default setting Base Address is 2F8h and the default IRQ is 3.
For the machine 2171/2172, they come with two 9-pin serial port.
Serial port 1 sets to Disable while serial port 2 sets the default to Enabled.
The default setting of Base Address is 2F8h and the default IRQ is 3.
Parallel Port
Your computer comes with one parallel port.
This parameter shows the default Enabled to activate the parallel port.
The default base address is 378h and the default IRQ is 7.
The default mode is ECP. The default DMA is 3.
Onboard PS/2 Mouse (IRQ-12)
This parameter enables or disables the onboard PS/2 mouse.
When set to Enabled, it allows you to use the onboard PS/2 mouse.
When set to Disabled, it deactivates the mouse and frees IRQ 12 for the use of other devices.
Onboard USB
This parameter allows you to enable or disable the Universal Serial Bus (USB) controller.
The default setting is Enabled.
USB Keyboard Mode This parameter enables or disables the use of a USB keyboard outside of Windows.
The default is Disabled.
Onboard PCI Audio Chip
This parameter enables or disables the onboard audio controller chipset.
This item does not appear in the menu if there is no physical audio chipset on the system board.
The default setting is Enabled.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.