|
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Product Overview (Aptiva 2170/71/72 - SL-A)
Introduction
This chapter gives a general overview of the Aptiva Machine Type 2170/2171/
2172, describes the standard and optional features, and details functional and
environmental specifications.
Product Overview
Machine Types 2170, 2171, and 2172 have two PCI slots and one PCI/ISA shared slot.
The 2170 system supports the AMD K6 processor family and
while the 2171 and 2172 supports the Pentium® III processors.
The machine types 2171 and 2172 support Accelerated Graphics Port (AGP), which allows
installed system memory to be used as texture memory, yielding a huge texture footprint
to enhance 3D graphical display performance.
Listed below are 2170, 2171 and 2172 system features:
Processors (Machine Type 2170)
- Socket-7 Zero Insertion Force (ZIF) connector.
- Detachable CPU fansink.
- One of the following processors can be installed:
- AMD K6 2XT/380 processor, 95MHz external, 380 MHz internal, with 3DNow (TM) technology
- AMD K6 2XT/400 processor, 100MHz external, 400 MHz internal, with 3DNow (TM) technology
- AMD K6 2XT/450 processor, 100MHz external, 450 MHz internal, with 3DNow (TM) technology
- AMD K6 2XT/475 processor, 95MHz external, 475 MHz internal, with 3DNow (TM) technology
Processors (Machine Type 2171/2172)
Pentium® III
- Includes Intel® MMX media enhancement technology plus additional 70 Streaming SIMD
(Single Instruction Multiple Data) extensions.
- Processor in Single Edge Contact Cartridge II (S.E.C.C. II, OLGA) with integrated PBSRAM L2 cache (512K)
- One of the following processors can be installed:
- Pentium® III - 450MHz internal, 100MHz external
- Pentium® III - 500MHz internal, 100MHZ external
Memory
- 512-KB Pipeline Burst Static RAM (PBSRAM).
Fixed onboard for 2170, built-in Pentium® III processors for 2171/2172.
- 8-MB video Synchronize DRAM (SDRAM).
Fixed onboard only for 2170 non-UMA model, built-in AGP video adapter card for 2171 and 2172.
- 168-pin Synchronous Dynamic Random Access Memory (SDRAM), Dual-in-line Memory Module (DIMM) sockets.
- 2 memory sockets.
- 8-MB, 16-MB, 32-MB, 64-MB or 128-MB DIMM.
- PC-100 (64-bit, non-ECC, 100MHz, 3.3volt) DIMMs with gold contacts
- Maximum memory is 256 MB.
External Ports
- Video port (15-pin D-sub connector)
- Parallel port (25-pin D-sub connector)
- Serial port (9-pin D-sub connector). 2170 has one serial port while 2171 and 2172 have two.
- Game/MIDI port (15-pin D-sub connector)
- Keyboard port (6-pin PS/2 mini-din connector)
- Mouse port (6-pin PS/2 mini-din connector)
- Two USB ports.
- Microphone-in jack
- Speaker-out jack
- Line-in jack
Diskette Drive
- AT-type
- 3.5-in. 1.44 MB slimline diskette drive.
Hard Disk Drive
- 3.5-Inch, 1-Inch height IDE AT drive. (3.5-in may be in acoustic mounting bracket)
- 128 KB 'look-ahead' cache memory in hard disk drive.
- Average and minimum 12 ms seek time, access time varies for the hard disk
drive and the hard disk drive manufacturer.
CD/DVD-ROM Drive
- 5.25-in. high-performance, 40X CD-ROM or 6X/32X DVD-ROM or 4X2X24 CD-R/W IDE/AT drive.
- Read data and play audio from standard and mini CD-ROM and audio compact discs (audio CDs).
DVD media supported on DVD models.
Multimedia
- A pair of external active speakers with power adapter for 2171/2172 or passive speakers for 2170.
- Noise canceling microphone (available on certain models)
Power Management
- Compliant to ACPI and supports Display Power Management Signaling (DPMS) monitor.
- Software shutdown by Windows 98.
- System enters standby mode if any of following conditions are met:
- Execute standby from Windows 98 Start menu
- Press system power button if it sets to act as standby function.
- System is idle and the standby timer set in the Windows 98 Power Management Property elapses.
Power Supply
- PC-98 compatible 145W ATX power supply
- Searchable high/low voltage selection
Internal Cabling
- Two 40-pin ribbon cables for hard disk drive and CD/DVD-ROM drive.
- One 34-pin ribbon cable for AT diskette drive.
- One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED).
- One 3-pin (3-wire) cable for power light-emitting diode (LED).
- One 2-pin (2-wire) cable for power switch.
- One 4-pin modem voice-in/speaker-out cable.
- 56.6 Kbps PCI modem adapter card with data/fax/voice or non-voice features.
- Telephone line-out (RJ-11) connector.
- Telephone line-in (RJ-11) connector.
Monitor (Not included with some models)
- Super Video Graphics Array (SVGA) monitor.
- Compliant to VESA power saving mode.
- Connector for a detachable grounded 3-wire power cord
- 1.8-m (5.8-ft.) attached signal cable
- Auto-sensing power input for 100 Vac to 240 Vac
- 15-Inch (13.7-Inch viewable image size) monitor
- 0.28-mm dot pitch
- Automatic scanning horizontal frequencies from 30 KHz to 54 KHz or 30 KHz to 69 KHz (for Japan)
- Vertical frequencies between 50 Hz and 120 Hz.
- DDC2A/B or DDC1/2B+ support (for Japan)
- OSD (On-Screen Display) menu (for Japan)
- 17-Inch (15.7-Inch viewable image size) monitor
- 0.28-mm or 0.27-mm dot pitch (for Japan)
- Automatic scanning horizontal frequencies from 30 KHz to 69 KHz or 30 KHz to 72 KHz (for Japan)
- Vertical frequencies between 50 Hz and 120 Hz.
- DDC1/2B+ support and OSD (On-Screen Display) menu.
Keyboard
- 104-key, 105-key, 107-key or 109-key rubber dome Rapid Access (TM) II keyboard with 1.8-m (5.8-ft.) cable
- Preferred Keyboard (for Brazil)
Mouse
- 2 Button PS/2 Sleek or ScrollPoint (TM) mouse with 1.8-m (5.8-ft.) cable
Back to
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.