IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Product Overview (Aptiva 2165 - SL-A)

Processors

•  Processor with the capabilities of 3D Now (TM) technology
•  Socket-7 Zero Insertion Force (ZIF) connector.
   You must remove the old processor to install an upgrade processor.
•  Detachable CPU heat sink with fan.
•  One of the following processors can be installed:
  •  AMD K6-2 380 MHZ CPU with 3D Now (TM)! technology
  •  AMD K6-2 450 MHZ CPU with 3D Now (TM)! technology

Memory

•  512-KB Pipeline Burst Static RAM (PBSRAM). Fixed onboard.
•  168-pin synchronous dynamic random access memory (SDRAM), dual inline memory module (DIMM) sockets.
  •  2 memory sockets.
  •  16-MB, 32-MB, 64-MB or 128-MB DIMM.
  •  Maximum memory is 256MB.

External Ports

For a detailed description see > 'Hardware Interfaces'

•  Video port (15-pin D-sub connector)
•  Parallel port (25-pin D-sub connector)
•  Serial port (9-pin D-sub connector)
•  Game/MIDI port (15-pin D-sub connector)
•  Keyboard port (6-pin PS/2 mini-DIN connector)
•  Mouse port (6-pin PS/2 mini-DIN connector)
•  Two USB ports
•  10/100 Mbps Ethernet port (only supported in some models)
•  Digital Flat Panel port (only supported in some models)
•  Microphone-in jack
•  Line-out jack
•  Line-in jack

Diskette Drive

•  AT-type
•  3.5-in. 1.44MB slimline diskette drive.

Hard Disk Drive

•  3.5-in., 1-in. height IDE AT drive.
•  512 KB cache buffer in hard disk drive.
•  Average and minimum 11.1 ms seek time, access time varies for the hard disk drive
   and the hard disk drive manufacturer.

CD-ROM Drive

•  5.25-in. high-performance, 40X CD-ROM IDE/AT drive.
•  Read data and play audio from standard and mini CD-ROM and audio compact discs (audio CDs).

Multimedia

•  One pair of internal speakers.

Power Management

•  Compliant to ACPI and supports display power management signaling (DPMS) monitor.
•  Software shutdown by Windows 98.
•  System enters standby mode if any of following conditions are met:
  •  Execute standby from the Windows 98 Start menu
  •  Press system power button if it is set to act as standby function.
     See 'Power Management Setup' on page 1-19.
  •  Standby timer set in the Windows 98 power utility timer elapses without system activity.

•  Monitor enters standby mode if:
  •  Windows 98 power utility timer elapses
  •  System sleep timer elapses

Power Supply

•  95-watt switchable high/low voltage power supply.
•  Standard SFX power supply with +5V and +3.3V standby power

Internal Cabling

•  Two 40-pin ribbon cables for hard disk drive and CD-ROM drive.
•  One 34-pin ribbon cable for AT diskette drive.
•  One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED).
•  One 3-pin (3-wire) cable for power light-emitting diode (LED).
•  One 2-pin (2-wire) cable for power switch.
•  One 16-pin game port cable.

Modem

•  56.6 Kbps PCI plug and play modem adapter card with data/fax features.
•  Telephone line-out (RJ-11) connector (Not available for all models).
•  Telephone line-in (RJ-11) connector.

Monitor

•  Super video graphics array (SVGA) monitor.
•  Compliant to VESA power saving mode.
•  Connector for a detachable grounded 3-wire power cord.
•  1.8-m (5.8-ft) attached signal cable.
•  Auto-sensing power input for 100 VAC to 240 VAC.

Keyboard

•  PS/2 104-key rubber dome IBM PS/2 Compatible Keyboard with 1.8-m (5.8-ft) cable.
   Keyboard is Geography/Model dependent.

Mouse

•  2-button PS/2 mouse with 1.8-m (5.8-ft) cable.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.