 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
General Guidelines (Aptiva 2165 - SL-A)
General Guidelines
The purpose of this Safety Inspection Guide is to help you identify possible unsafe conditions
on machines that are being inspected for a Maintenance Agreement.
Each machine has necessary functions items installed to provide the operators and service
personnel with an acceptable level of safety.
This guide lists only these items.
Good judgment should be used to identify possible safety conditions not covered by this Safety Inspection Guide.
If any unsafe conditions are present, you must find out how serious the hazard is and if you can continue before you correct the hazard.
All current IBM Aptiva service supplements outlining feature/model changes, along with the machine history, should be reviewed.
Check the following items:
- Damaged, missing, or changed parts, especially in the area of the On/Off switch and the power supply.
- Damaged, missing, or changed covers.
- Possible safety exposure from any non-IBM attachments.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.