 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
System Board (Aptiva 2165 - SL-A)
System Board
To remove the system board from the system:
- Remove the three securing screws of the system board tray and I/O bracket.
- Push the I/O bracket outward from the case to remove it.
- To remove the system board and the tray, pull the lever so that it rotates toward you.
For Jumper / Locations see > System Board Locations
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.