|
Starting the Setup Utility
Follow these steps to enter Setup when the computer is off:
+----------------------------------------------+
| Main Menu |
|----------------------------------------------|
| |
| Select a Menu: |
| |
| ° Viewing System Information |
| ° Viewing Video Information |
| ° Disk Drives |
| ° Input/Output Ports |
| ° Power Management |
| ° Startup Options |
| ° Model Information |
| ° Date and Time |
| ° Advanced Options |
| |
| < > < > Move highlight bar <<> Select |
| <Esc> Exit <F5> Load default settings |
| |
+----------------------------------------------+
The following table lists specific keys on the keyboard that will help you move through the Setup menus:
Keys | Function |
---|---|
Down- or up-arrow key | Use these arrow keys to highlight an option on the menu. |
(Press the Enter key to choose the option.) | |
Left- or right-arrow key | Use these arrow keys to make a selection and change |
an option's setting. On some menus, you can use these | |
keys to move from one field to another. | |
PgUp | Press this key to move from a menu to the menu immediately |
preceding it. This key works only in options with multiple menus. | |
PgDn | Press this key to move from a menu to the menu immediately |
following it. This key works only in options with multiple menus. | |
F1 | Press this key if you want help for a selected menu option. |
Esc | After viewing or making changes to the settings on a menu, press |
this key to exit the menu. | |
Enter | Press this key to choose a highlighted option from a menu. |
Changing Parameter Settings
In the Setup menus, the configuration information that you can change is
enclosed in brackets like these: [ ]. You cannot change any information that is
not enclosed in brackets. Use the up- or down- arrow keys to highlight options
then press Enter to display a menu. When changing the setting of a particular
parameter, highlight the setting then use the left- or right- arrow key to change
the setting.
Loading the Default Settings
When you purchase an Aptiva computer, it is already configured for use.
The original configuration settings, also called factory or default settings, are stored in the CMOS.
Setup includes an option Load Default Settings that lets you reload the original configuration at any time.
If you have made changes in Setup but would like to restore the default settings, follow these steps:
You must load the Setup default settings in the following instances:
Exiting Setup
When you complete your changes or finish viewing information, return to the main menu.
From this location, you can exit Setup and save your changes or exit without saving your changes.
Follow these steps to exit Setup:
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.