|
|
|
If you are replacing an installed hard disk drive, be sure to make a backup copy
of the data from the drive that you are replacing.
If you are using the OS/2 operating system on the existing drive, you must install the new drive in the computer before using OS/2 to
partition and format the drive.
Be sure to create OS/2 Utility Diskettes before installing the new drive. For more information, see 'Creating Utility Diskettes for OS/2' on page 2-8 in the paper User's Guide.
If you are using the Windows NT operating system on the existing drive, you must install the new drive in the computer before using
Windows NT to partition and format the new drive.
If you are installing the new drive in a computer that does not have an existing drive, you must install the new drive in the computer
before you can use Disk Manager or an operating system to partition and format the drive.
If you are installing the EIDE Hard Disk Drive as the only drive on the IDE cable, you must place the jumpers in the master configuration.
If the EIDE Hard Disk Drive will not be the only drive on the IDE cable, note these jumper configuration positions:
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.