Step 3: Change Configuration Settings (8650)

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Step 3: Change Configuration Settings (8650)

Step 3: Change Configuration Settings

NOTE: If the administrator password entry prompt appears, you must enter it to access the selection.

After adding adapters, select this choice to change the configuration, if necessary. If you change a setting in this step, you might need to change a switch or jumper setting on the system board or on a device. See 'System Configuration Utility Default Setting' for a listing of the default values.

All settings will remain in the default position if you do not use this selection to change the configuration.

If an administrator password is not set, the system prompts you to set an administrator password. You can press Esc to continue using the System Configuration Utility program without setting an administrator password.

Advanced Options

Press F9 to display the Advanced Options Menu screen. This screen provides options to display configuration data. You can select the following choices:

Option Description Global Resource Map Lists allocated resources. Board Details Provides details on the adapter highlighted on the Change Configuration Settings screen. System Details Displays configuration data on the entire system and its present state of configuration. Physical Board ID Lists the identifiers of adapters physically installed in the system.

Option	Description
Global Resource Map	Lists allocated resources.
Board Details	Provides details on the adapter highlighted on the Change Configuration Settings screen.
System Details	Displays configuration data on the entire system and its present state of configuration.
Physical Board ID	Lists the identifiers of adapters physically installed in the system.

Back to

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.