|
|
|
The architecture of the adapter and the architecture of the slot the
adapter is installed in must be the same. (Examples: An EISA adapter
must be installed in a EISA slot, and a Micro Channel adapter must be installed in
a Micro Channel slot.
Network Adapter
Device Driver
LAN Server 4.0 MPTS
3Com Token-Link III EISA
IBMTOKMP.OS2
IBM SMP Token-Ring Network Adapter
3Com EtherLink II 3C503-16 ISA
ELNKII.OS2
3Com 3C503 EtherLink II Adapter
3Com EtherLink III EISA
ELNK3.OS2
3Com Etherlink III Family OS/2
3Com EtherLink III ISA
ELNK3.OS2
3Com Etherlink III Family OS/2
IBM Token-Ring Network 16/4 ISA
IBMTOKMP.OS2
IBM SMP Token-Ring Network Adapter
IBM Token-Ring 16/4 ISA-16
IBMTOKMP.OS2
IBM SMP Token-Ring Network Adapter
IBM LAN Adapter for Ethernet ISA
IBMENI.OS2
IBM LAN Adapter for Ethernet
Intel® TokenExpress 16S ISA
OLITOK16.OS2
Use the NDIS driver on the adapter diskette
Intel® EtherExpress 16C ISA
EXP16.OS2
Intel® EtherExpress 16 Family
SMC EtherCard Elite 16 Ultra ISA
SMC8000.OS2
Use the NDIS driver on the adapter diskette
If OS/2 LAN Server provides a device driver for the network
adapter, use the table above to
determine the appropriate device driver to
select during the installation process. If OS/2 LAN Server
does not provide the device driver, use the NDIS device driver located on the
diskettes supplied with the adapter. (Check the adapter documentation
for installation instructions.)
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.