 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Restoring the Disk-Array Configuration
Restoring the Disk-Array Configuration
To restore the disk-array
configuration information in the RAID adapter
EEPROM module, use the
SCSI-2 Fast/Wide PCI-Bus Adapter Configuration Option Diskette
and an up-to-date Disk Array Configuration
Backup diskette.
NOTE:
Because dynamic changes in the configuration of the disk array
occur due to hot-spare drive replacement or other drive
maintenance activity, the
configuration backup information on the diskette might be different
from that in the adapter.
It is important that you back up the
disk-array configuration information frequently,
to keep the backup
information on the diskette current.
To restore the RAID configuration information:
- Start the RAID configuration program by
inserting the IBM SCSI-2 Fast/Wide PCI-Bus Adapter Configuration Option Diskette into the
primary diskette drive
and powering-on the system.
If the system already
is powered-on,
press Ctrl+Alt+Del.
Select Start RAID Configuration Program
from the PC DOS start-up menu and
press Enter.
- Select Advanced functions from the Main Menu.
- Select Restore config. from diskette.
- Follow the instructions on the screen.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.