Diagnostics and Test Information (8640-300)

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Diagnostics and Test Information

NOTE:

The QAPlus/PRO diagnostic program recognizes the primary processor as LUN 1 and the secondary processor as LUN 2. During testing the program automatically tests LUN 1. You must select LUN 2 if you want the program to test the secondary processor.
The type of DASD diagnostics required to test the hard disk controller (adapter) and drives is determines by the type of hard disk adapter installed in the computer.
Always start with General Checkout (QAPlus/PRO)

Problem Reference Error Codes/Error Messages 'Symptom-to-FRU Index' DASD Adapter Problems For non-disk-array models, see 'SCSISelect Utility Program' For SCSI-2 Fast/Wide PCI-Bus RAID Adapter, see 'Disk Array Configuration' Memory 'Symptom-to-FRU Index' Power Supply Voltages 'Power Supply Voltages' Miscellaneous 'Symptom-to-FRU Index'

Problem	Reference
Error Codes/Error Messages	'Symptom-to-FRU Index'
DASD Adapter Problems	For non-disk-array models, see 'SCSISelect Utility Program' For SCSI-2 Fast/Wide PCI-Bus RAID Adapter, see 'Disk Array Configuration'
Memory	'Symptom-to-FRU Index'
Power Supply Voltages	'Power Supply Voltages'
Miscellaneous	'Symptom-to-FRU Index'

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.