IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Systems Checkout (2604)

1.  Power-off the computer.
2.  Remove the battery from the computer.
3.  Check the battery voltage. The voltage should be a minimum of 10.8  Vdc.

   If the voltage is not correct, try recharging the battery  pack.

   If the voltage is correct, continue with the next step to  test the AC adapter voltage.

4.  Unplug the AC adapter from the computer.
5.  Measure the voltage at the points shown.

Vdc	+ Lead	- Lead
+16.6	2	1

If the voltage is not correct, replace the AC adapter.
If the voltage is correct, go to 'Undetermined Problems'.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.