|
|
|
+---+
|001|
+---+
- Power-off the computer and wait 10 seconds.
- Reseat the memory module.
- Insert the Advanced Diagnostics diskette into the diskette drive.
- Power-on the computer.
- Make a note of any error code you receive.
DID YOU RECEIVE A 20X XXXXXXXX XXXXXXXX
OR 02XX POST ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+002| Go to Step 006
+-+-+ +---+
|003|
+---+
IS A MEMORY MODULE INSTALLED ?
+---+
Yes No-+004| Replace the system board. Press Fn and F1
| +---+ to set the time and date to remove any 16X errors.
+-+-+
|005|
+---+
Replace the memory module kit.
If the error remains, replace the system board.
Press Fn and F1 to set the time and date and
remove the 16X errors.
------------------------------------------------------------------------
+---+
|006|
+---+
- If you need to bypass an error, press Esc or F1.
- If you cannot continue, you might have a keyboard problem,
go to 'Symptom-to-FRU Index'
DID THE ADVANCED DIAGNOSTICS MENU APPEAR ?
+---+
Yes No-+007| You might have a diskette drive problem,
+-+-+ +---+ go to 'Symptom-to-FRU Index'
|008|
+---+
- Press 0 (SYSTEM CHECKOUT), then press Enter.
- Follow the screen instructions.
NOTE: Ignore a 199 error.
- Press 0 (RUN TESTS ONE TIME), then press Enter.
- Press 2 (MEMORY), then press Enter.
DID YOU RECEIVE A 2XX ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+009| Go to Step 011
+-+-+ +---+
|010|
+---+
Go to Step 003
------------------------------------------------------------------------
+---+
|011|
+---+
DID THE SYSTEM CHECKOUT MENU APPEAR AT THE END OF THE TEST ?
+---+
Yes No-+012| You might have a power source problem,
+-+-+ +---+ go to 'Power Systems Checkout'
|013|
+---+
The Advanced Diagnostics tests finished without detecting
a failure. If you suspect an intermittent problem, start an error log.
If you need instructions, refer to 'Error Log'
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.