 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Checking Installed Devices (8573)
Checking Installed Devices
If an adapter or device is missing from the
list, you might have one
of the following conditions:
- Your Reference Diskette does not contain the module of code
required to support that device.
- The missing device is a 5.25-Inch 360KB
or 1.2MB External Diskette
Drive adapter, or another unrecognizable adapter.
- The missing device is defective.
- An adapter or system board is defective.
Run Automatic Configuration (see 'Automatic
Configuration', before continuing) and determine which type of device,
SCSI or non-SCSI, is missing from the Installed Devices List, in
Advanced Diagnostics, then continue with the following steps. (If
SCSI and non-SCSI devices both are missing, go to 'Undetermined Problem')
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.