Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Numeric Error Codes (8554)



Numeric Error Codes

In the 'Symptom-to-FRU Index', an X in an error message can be any number.

Symptom/Error    FRU/Action
  
00010200, 00010300, 1. System Board
00010400, 00010700
00010800 1. System Board
  2. Communications Cartridge
  
00011000 1. IC DRAM Card or Memory Module
(See 'Memory Checkout' 2. System Board
before replacing any FRUs.)
000110XX 1. IC DRAM Card or Memory Module
  2. System Board
  
000113XX 1. System Board
  2. Communications Cartridge
  3. Any Drive
  
000114XX 1. Communications Cartridge
  
000118XX 1. IC DRAM Card or Memory Module
  2. System Board
  
00016100 1. See 'Testing the Backup Battery'
  2. System Board
  3. Voltage Converter
  
00016300, 00016400, 1. Set Configuration
00016500, 00016900 2. System Board
(If setting configuration 3. Communications Cartridge
does not solve the problem, 4. Hard Disk Drive
see 'Checking Installed Devices') 5. IC DRAM Card
  6. Memory Module
  
000166XX 1. Communications Cartridge
  
000171XX 1. See Testing the Backup Battery'
  2. System Board
  
000172XX 1. System Board
  
00017300 1. See Testing the Backup Battery.
  2. System Board
  3. Voltage Converter
  
00017400 1. Set Configuration
(If Automatic Configuration 2. System Board
does not solve the problem, 3. Math Coprocessor
run Advanced Diagnostics.)
00019000, 000191XX 1. System Board
  
00019200 1. Lid Switch
  2. Keyboard Control Card
  3. System Board
  
00019300 1. System Board
  
000199XX 1. System Board
  
0001XXXX 1. System Board
(not listed above) 2. Communications Cartridge
  3. Indicator Card
  
0002XXXX 1. IC DRAM Card or Memory Module
(See 'Memory Checkout' 2. System Board
before replacing any FRUs.)
00030100, 00030500 1. Keyboard Control Card
  2. System Board
  3. Keyboard or Numeric Keypad
  
00030200, 00030300, 1. System Board
00030400 2. Keyboard Control Card
  3. Keyboard or Numeric Keypad
  
00030600 1. Keyboard or Numeric Keypad
     Auxiliary Input Device
  2. Keyboard Control Card
     System Board
  3. I/O Panel Assembly
  
0004XXXX 1. System Board
  2. Any Parallel Device
  3. Communication Cable
  4. I/O Panel Assembly
  
000601XX 1. Diskette Drive
  2. System Board
  3. Diskette Drive Cable
  
000602XX 1. Defective Diskette
  
000655XX, 000662XX 1. System Board
000670XX to 000675XX 2. Diskette Drive
  3. Diskette Drive Cable
  
0006XXXX 1. Diskette Drive
Unsupported drive or cable. 2. System Board
  3. Diskette Drive Cable
  
000720XX 1. System Board
  2. Math Coprocessor
  
0007XXXX 1. Math Coprocessor
  2. System Board
  
0011XX00 1. System Board
  2. Serial Connector
  3. Any Serial Device
  4. Communication Cable
  
0014XXXX 1. Printer
(See 'Printer Checkout' 2. System Board
before replacing any FRUs.)
0024XX00 1. Display Control Card
  2. Voltage Converter
  
005002XX, 005006XX, 1. Display Control Card
005008XX 2. Voltage Converter
  3. External Display
  4. I/O Panel Assembly
  
005004XX, 005010XX, 1. Display Control Card
005032XX 2. LCD Panel
  3. LCD Cable
  
005009XX 1. External Display
  2. Display Control Card
  3. I/O Panel Assembly
  
00860100, 00860200 1. Mouse or Trackball
00861700, 00861800 2. System Board
  3. Numeric Keypad
  4. I/O Panel Assembly
  
0086XX00 1. System Board
  2. Mouse or Trackball
  3. Numeric Keypad
  4. I/O Panel Assembly
  
0101XXXX 1. See 'Fax/Modem Checkout'
  
010436XX 1. System Board
  2. Hard Disk Drive
  3. Hard Disk Drive Cable
  
0104XXXX 1. Hard Disk Drive
  2. System Board
  3. Hard Disk Drive Cable
  
0130XXXX 1. Indicator Card
  2. System Board
  3. Keyboard Control Card
  
0137XXXX 1. Serial Adapter
  2. System Board
  3. Communication Adapter Holder
  4. Any Serial Device
  5. Communication Cable
  
0166XXXX, 0167XXXX 1. Adapter in Communications Cartridge
  2. Communications Cartridge
  
I9990301     a. Select Set features from the Main Menu.
(Startup drive not found.)     the Reference Diskette and
      verify if the startup sequence is correct.
      b. Select Set features from the Main Menu.
      c. Select Set startup sequence.
      d. Check the list of devices on the screen.
  
I9990302 1. Make sure that an operating system is installed.
(Operating system not found.) 2. Hard Disk Drive
  3. System Board
  4. Hard Disk Drive Cable
  
I998XXXX, I9990303 1. Restore the system programs onto the system partition.
(See 'Hard Disk Partition' 2. Set configuration
before replacing any FRUs.) 3. Hard Disk Drive
  4. System Board
  5. Hard Disk Drive Cable


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.