Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Numeric Error Codes (8551)



Numeric Error Codes

Numeric Error Codes 

Symptom/Error    FRU/Action
  
00010200, 00010300, 1. System Board
00010400, 00010700
00010800 1. System Board
  2. Communications Cartridge
  
00011000 1. Memory Module Kit
(See 'Memory Checkout' 2. System Board
before replacing any FRUs.)
000113XX 1. System Board
  2. Communications Cartridge
  3. Any Drive
  
000114XX 1. Communications Cartridge
  
000118XX 1. Memory Module Kit
  
00016100 1. See 'Testing the Battery Pack'
  2. System Board
  3. Voltage Converter
  
00016300, 00016400, 1. Set Configuration
00016500, 00016900 2. System Board
(If setting configuration 3. Communications Cartridge
does not solve the problem, see 4. Hard Disk Drive
'Checking Installed Devices' 5. Memory Module Kit
  
000166XX 1. Communications Cartridge
  
000171XX, 000172XX 1. System Board
  
00017300 1. See 'Testing the Battery Pack'
  2. System Board
  3. Voltage Converter
  
00017400 1. Set Configuration
(If Automatic Configuration
does not solve the problem,
run Advanced Diagnostics.)
00019000, 000191XX    System Board
  
00019200 1. Lid Switch
  2. Keyboard Control Card
  3. System Board
  
00019300 1. System Board
  
000199XX 1. System Board
  
0001XXXX 1. System Board
(not listed above) 2. Communications Cartridge
  3. I/O Panel Assembly
  
0002XXXX 1. Memory Module Kit
('See Memory Checkout' 2. System Board
before replacing any FRUs.)
00030100, 00030500 1. Keyboard Control Card
(Always power-on the computer 2. System Board
before external any external device.) 3. Keyboard
  4. Numeric Keypad
  
00030200, 00030300, 1. System Board
00030400 2. Keyboard Control Card
  3. Keyboard or Numeric Keypad
  
00030600 1. Keyboard or Numeric Keypad
  2. Auxiliary Input Device
  3. Keyboard Control Card
  4. System Board
  5. I/O Panel Assembly
  
0004XXXX 1. System Board
  2. Any Parallel Device
  3. Communication Cable
  4. I/O Panel Assembly
  
000601XX 1. Diskette Drive
  2. System Board
  3. Diskette Drive Cable
  
000602XX 1. Defective Diskette
  
000655XX, 000662XX 1. System Board
000670XX to 000675XX 2. Diskette Drive
  3. Diskette Drive Cable
  
0006XXXX 1. Diskette Drive
(Unsupported drive or cable) 2. System Board
  3. Diskette Drive Cable
  
0011XX00 1. System Board
  2. Any Serial Device
  3. Communication Cable
  4. I/O Panel Assembly
  
0014XXXX 1. Printer
(See 'Printer Checkout' 2. System Board
before replacing any FRUs.)
0024XX00 1. System Board
  
005002XX, 005006XX, 1. System Board
005008XX, 005041XX 2. External Display
  3. I/O Panel Assembly
  
005004XX, 005010XX, 1. System Board
005030XX to 005032XX, 2. LCD Panel
005051XX to 005062XX 3. LCD Inverter
  4. LCD Cable
  
005009XX, 005040XX 1. External Display
  2. System Board
  3. I/O Panel Assembly
  
00860100, 00860200 1. Pointing Device (Mouse)
  2. System Board
  3. Numeric Keypad
  4. I/O Panel Assembly
  
0086XX00 1. System Board
  2. Pointing Device (Mouse)
  3. Numeric Keypad
  4. I/O Panel Assembly
  
010103XX to 010110XX, 1. See 'Fax/Modem Checkout'
010116XX to 010153XX,
010171XX, 0101XXXX
010436XX 1. System Board
  2. Hard Disk Drive
  3. Hard Disk Drive Cable
  
0104XXXX 1. Hard Disk Drive
  2. System Board
  3. Hard Disk Drive Cable
  
0130XXXX 1. I/O Panel Assembly
  2. System Board
  3. Keyboard Control Card
  
0137XXXX 1. Any Serial Adapter
  2. System Board
  3. Voltage Converter
  4. Any Serial Device
  5. Communication Cable
  
0166XXXX, 0167XXXX 1. Adapter in Communications Cartridge
  2. Communications Cartridge
  
I9990301 1. Start the backup copy of the
(Startup drive not found.)     Reference Diskette and
      check if the startup sequence is correct.
      a. Select Set features from the Main Menu.
      b. Select Set startup sequence
      c. Check the list of devices on the screen.
  
I9990302 1. Make sure that an operating system is installed.
(Operating system not found.) 2. Hard Disk Drive
  3. System Board
  4. Hard Disk Drive Cable
  
I998XXXX, I9990303 1. Restore the system programs onto
(See 'Hard Disk Partition'     the system partition.
before replacing any FRUs.) 2. Set configuration
  3. Hard Disk Drive
  4. System Board
  5. Hard Disk Drive Cable


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.