Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Testing the Quick Charger (8551)



Testing the Quick Charger

If an unusual noise can be heard from the operating quick charger, replace it.
  1.  Perform steps 1 through 3  of the 'Testing the Battery Pack' to  verify the battery pack is operating correctly.
  2.  Connect the power cord to the quick charger and the other  end to the electrical outlet.  Ensure that the power indicator turns on.

    If the power indicator does not turn on, check the power cord of the  quick charger for proper installation and continuity.  If this does not correct the problem,  replace the quick charger.

  3.  Install the battery pack.

    If the charging indicator does not  start blinking, replace the quick charger.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.